FLOWSERVE SEM 10 FLOW METER
FLOWSERVE SEM 10 FLOW METER
The Flowserve SEM 10 flow meter employ positive displacement nutating disk technology to meter liquids of various viscosities with great accuracy and nominal pressure loss. With the largest LCD display available on the market, large positive touch buttons and simple one-touch operation, the SEM-10 and SEM-10FT flow meters are easy to read and to use.
Positive Displacement Nutating Disk Design can meter liquids of various viscosities with an accuracy of 0.5% and a minimum loss of pressure. LCD Display measure 20 mm (0.75 in) and is the largest on the market. One-Inch Rear Mounting Port allows meter to be mounted directly to the pump discharge. Battery can be replaced without removing the meter and without chemical exposure.
Flowserve SEM 10 Flow Meter Features:
- Simple, one-touch operation
- Flows from 0.5 to 6.8 m³/h (2 to 30 gallons per mminute)
- Accuracy of +/- 0.05%
- Choice of three calibration procedures
- Extended battery life
- Large, positive touch buttons
- Materials of construction:
- Meter body – Nylon
- Meter chamber – Polyphenylene sulfide & stainless steel
- O-rings – Viton©
- Electric body – Nylon
- Screws – stainless steel
Have more questions? Contact us!
Specifications
- Flow Meter Pump End: FSSEM10
- Flow Meter Hose End: FSSEM10FT
- Fixed Mounting or Flow Through Configurations provide application flexibility.
- Positive Displacement Nutating Disk Design meters liquids of various viscosities with great accuracy and minimal pressure loss.
- Simple, One-touch Operation with large, positive touch buttons
- LCD Display measures 20 mm (0.75 in) and is the largest on the market.
- Choice of Three Calibration Modes to suit application needs
- Extended Battery Life is provided by one 3-volt lithium battery.
- Auto Shut-off after 40 seconds of inactivity saves battery life.
- Auto wake-up occurs when pumping resumes.
Resources
Kits & Replacement Parts
- Meter Housing c/o SEM10: FSS100SN
- Electronics – face: FSSEM10KIT1
- Meter Chamber kit: FSSEM10KIT2
- Magnet Kit: FSSEM10KIT4
- Replacement Battery: CR2032