Part Number: RA10630172058

Raven RFM 15P flow meter is compatible with most chemicals and liquids. With a turn down ratio of 50:1 makes the RFM 15P meter an ideal choice for most agricultural and industrial applications. The RFM 15P flow meter can read flow rates of 0.3 gallons per minute up to 15 gallons per minute. The flow meter also comes with 1.5″ inlet/outlet pipe threads and M200 flange mounting capabilities. The RFM flow meter does not have a digital display but is intended to be used with Raven flow control systems such as our fertilizer sectional control or sprayer applications. The operation voltage range is 4.5 volts DC to 16 volts DC.

  • To achieve the most accurate low rate metering mount the meter housing vertically with the fluid pumping “up” the meter.
  • The meter comes with a standard 3 pin coax connector.
  • The sensor is a repairable item. look at our kits and replacement parts.
  • The flow meter calibration number is attached to the sensor wire. This value is set at factory and can be adjusted to optimize metering on your applicator.
  • We support the products we sell. If you need help to set up your meter call us!

Have more questions? Contact us!


  • Inlet/Outlet: 1-1/2″ FNPT or M200 Flanged
  • Pressure Rating: 175 PSI
  • Typ. Pulses/Gal: 72
  • Rated Capacity: 0.3-15 GPM
  • Body: Polypropelene
  • Measuring Mechanism: Turbine
  • 5 VDC Supply Voltage
  • 10 mA Supply Current

Kits & Replacement Parts

Replacement Sensor: RA10630171669