Banjo Gas Powered Centrifugal Transfer Pumps
Gas powered Centrifugal Transfer Pumps
The engineers at Banjo have designed the poly pumps to protect the engine seal in the event of pump seal failure. The pump is separated from the engine by 1/2” and a special slinger/engine seal that protects the engine from any corrosive fluids when installed. This new slinger design is the best in the poly pump industry at protecting your engine. For additional seal protection, small vanes are molded into the back side of the impeller. During operation, these vanes pump out a major portion of the liquid from the seal area which reduces pressure. The internal operating pressure of the pump is approximately 50 PSI with the seal area operating at only 5 PSI. This leaves enough liquid in the seal area to lubricate and cool.
Banjo builds pump protection into EVERY! pump.
Maximum engine protection – pump is separated from engine!
Large prime plug thumb screw
1 1/2”, 2” or 3” ports
“V” shaped body for quicker priming
Large Drain plug thumb screw
High strength glass-filled polypropylene construction
Impeller bolt easily removable
High performance precision molded impellers
Mechanical shaft seal (available in 3 materials)
Large weep holes
All stainless steel hardware
Heavy duty body O-ring
Click Here for details: Gas powered pumps