Part Number: BAMFM300

The Banjo BAMFM300 flow meter is an excellent choice for metering high volume products. With unrestricted flow designed in the meter housing, the BAMFM300 can read flow as fast as you can push it through a 3 inch pipe. The MAG meter design works with products like water, fertilizer, Round-Up and Liberty. However, the meter cannot read products that are petroleum based.

±:1% of reading (between 10% and 100% of maximum flow)
±:3% of reading (between cutoff and 10% of maximum flow)
Displays overall total volume batch total volume!
Easy to change six (6) AA batteries.
Flow rate allows for Gallons or Liters Per Minute.
Glass-reinforced polypropylene.
Measures water and most conductive liquids.
No moving parts to fail during use.
Self calibrating meter.
Temperature range from 0º: to 150º: F
Maximum operating pressure 200 PSI.
The display reads digits for Rate, digits for Total and decimal place reading in tenths.
There are photoeyes located on the face of the flowmeter. Note: These are not push buttons, to activate you must hold your finger over the photoeye for 2-4 Seconds.

Have questions? Contact us!